Image for Illustrative Purposes Only
Hakko Logo

Hakko FR-811 SMD Hot Air Rework Station

SKU: HFR811-19

FR-811

$3,660.50

EX. GST
$4,026.55
INC GST
Out of Stock: Available to Order

own it from $10 a week with Group 2 Copy Created with Sketch.

Features
Shipping & Delivery
  • Possible to make full-scale thermal profiles with 6-zone hot air and a bottom heater
    FR-811 can provide 6 zones in which temperature, time, and air flow are controlled. Therefore FR-811 can make a full-scale thermal profile which is close to reflow profiles made by a reflow oven. 

  • Record thermal data
    By connecting a thermocouple included with FR-811, the temperature of the component or circuit board can be measured and recorded. In addition, if "TC LINK" is set, the heater output can be automatically controlled so that the temperature of the thermocouple attached to the component or circuit board follows the set profile

  • Operation on a PC for various settings
    By connecting FR-811 and a computer with a USB cable and using the dedicated software which comes as standard, a set thermal profile and actual temperature change can be shown in a graph in real time. Also, change of thermal profile and fine adjustment in a profile can be made on a computer operation. In addition, the set values and graph can be saved in csv format.

  • Linked operation with bottom heater
    FR-811 can control on/off timing and output of the bottom heater 

High power and large volume hot air for quick removal of components

A tool that can provide powerful hot airflow for repairing high heat capacity circuit boards that require high blow volume and high output, and sufficient hot airflow for appropriate blow volume and high output for high-density mounting substrates.

New user friendly functions for SMD rework

  • New type of nozzles for improving temperature characteristics
    The new nozzles improve work efficiency with uniform heating by hot air convection inside the nozzle which is created due to vents on the nozzle top. (Only with BGA nozzles)

  • Vacuum pickup function
    The vacuum pickup function is to pick up a component with a suction pad and vacuum. It will pick a component only after the hot air melts solder joints. This can avoid an error to peel off the land by removing a component with excessive force.

  • Pickup indicator
    By pre-setting pickup function, a component can be picked up automatically when solder is melted. At the same time, the indication comes up and the moment of picking up will be visible. Even a component and solder joints can not be seen as covered by a nozzle, easy and safe picking up is possible 

Interface designed for intuitive operation. Possible to link to a PC

  • Easy-to-read LCD
    Equipped with a high-visibility LCD to make it easy to check the various product settings or operation status. Indications are displayed using graphics as well as letters and numbers so information can be checked intuitively. 

  • Easy-to-operate multi-direction control knob
    The multi-direction control knob makes it easy to make and change settings shown in the LCD.  There are several ways of knob movements, dialing, pressing, and tilting up and down and left to right for quick operation.

  • Link to a PC (A USB I/F terminal available)
    A USB I/F terminal is available to link to a computer. The dedicated software, which can display and record various settings or temperature data on a computer screen in real time, is included. 

  • A USB device terminal for easy data transfer
    Data can be transferred through a USB memory even without a computer

Hakko FR-811 SMD Hot Air Rework Station includes

  • Station with handpiece
  • Grip stand assembly
  • Vacuum pipe control knob (with screw)
  • Pads (qty 2 each of Ø3 mm, Ø5 mm, Ø7.6 mm)
  • USB cable
  • Software (CD-ROM)
  • Thermocouple
  • Heat resistant pad
  • Power Cord
  • Temperature distribution chart
  • Instruction manual
Hakko FR-811 SMD Hot Air Rework Station Specifications
Power Consumption 1100-1300 W (220-240 V)
Temperature Range 50-600°C
Station  
Power Consumption 30 W
Air Flow 001-100% (5-115 L/min.)
Dimensions (W x H x D) 160 x 145 x 220 mm
Weight 1.5 kg
Hand Piece  
Power Consumption 1070-1270 W (220-240 V)
Total Length 250mm
Weight 180 g


Hakko FR-811 SMD Hot Air Rework Station Resources & Literature Downloads
(Please click title to download)

User Instruction manual

 


Discover the Hakko FR-811 SMD Hot Air Rework Station at Mektronics Australia – your trusted source for quality tools and equipment!

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.