JBC JTSE-2B Hot Air Station

• 1 x Hot Air Control Unit

• 1 x JTT Heater Hose Set

• 1 x JTS Stand for JTT Heater Hose Set

• 1 x ESHT Extractor Stand for Hot Air

• 1 x E2052 Extractor 52 (20 x 20 mm)

• 1 x E2064 Extractor 64 (20 x 26 mm)

• 1 x E2184 Extractor 80 (24 x 24 mm)

• 1 x P2220 Protector 32 (10 x 10 mm)

• 1 x P2235 Protector 24 (12 x 17 mm)

• 1 x P4000 Protector 44 (12.5 x 12.5 mm)

• 1 x P2230 Protector 48 (15 x 15 mm)

• 1 x P4010 Protector 60 (17 x 17 mm)

• 1 x T2050 Tripod Ø 39 mm

• 1 x T2250 Tripod Ø 85 mm

• 1 x CU110 Cups for Extractors & Tripods

• 1 x A2330 Suction Tube for Protectors & Extractors

• 1 x JN2015 Bent Nozzle Ø4 - 18º for JTT

• 1 x JN2012 Bent Nozzle Ø6 - 18º for JTT

• 1 x JN2020 Straight Nozzle Ø8 for JTT

• 1 x PH218 Thermocouple Type K

• Selectable Temperature: 150 to 450 ºC (300-840 ºF)

• Air flow: 5 to 50 SLPM

• Temperature profiles: Design specific thermal profiles to avoid thermal shock during soldering processes. Up to 25 fully configurable soldering profiles can be stored.

• Operating modes: Heating / Profiles / Cooling

• Vacuum: 30% / 228 mmHg / 9 inHg

• Type K thermocouple: Can be used both for Control and Protection purposes.

• USB-B (rear): Software PC

• USB-A (front): Firmware update, Graphics / Profiles management

• Robot: RS-232 remote control

• Pedal: Optional tool control

• Equipotential bonding: Optional connection to EPA

Operating temp. range: 10 to 50 ºC / 50 to 120 ºF

• Premium Station: 232 x 148 x 160 mm / 4.93 kg.

• Package: 490 x 485 x 278 mm / 6.01 kg.

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.