Image for Illustrative Purposes Only
Metcal MX-5241 Dual Port Tweezers, Soldering & Rework System
SKU: METMX-5241
MX-5241
DESCRIPTION
Features
Shipping & Delivery
Metcal MX-5241 Dual Port Tweezers, Soldering & Rework System
*** Replaces the MX-5041 ***New Dual Port Simultaneous Soldering and Rework System with both the Advanced™ Hand-piece and the Precision Tweezers. Users get maximum application flexibility for soldering and reworking the widest range of surface mount components simultaneously.
Discover the Metcal MX-5241 Dual Port Tweezers, Soldering & Rework System at Mektronics Australia – your trusted source for quality tools and equipment!
-
Can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed.
-
Configured with the Metcal Advanced Soldering and Rework Hand-piece and Precision Tweezer Hand-piece
-
Microprocessor controlled power supply providing more power for challenges such as high mass components, multi-layered boards and lead-free solders.
-
Improved ergonomics with lightweight hand-pieces.
-
Greater process control with SmartHeat ® Technology.
-
ESD safe with incoming AC ground monitoring circuitry.
-
Built-in power indication meter with digital display and bar graph that dynamically provides the operator with feedback on the status of the soldering operation.
-
Metcal TipSaver™ Workstand improves tip life with its "Auto-Sleep" function.
|
MX-PS5200 |
Power supply, 100 to 240 VAC input, dual switch port with LCD Display |
|
|
MX-PTZ |
Tweezers Hand-piece with one cartridge removal pad |
|
|
MX-H1-AV |
Metcal Advanced™ Hand-piece with one cartridge removal pad |
|
|
MX-W4PT |
Workstand for Tweezers Hand-piece with one sponge and one brass pad |
|
|
MX-W1AV |
Workstand for Metcal Advanced™ Hand-piece, Soldering and Rework with one sponge and one brass pad |
NOTE: No tip/cartridge included
Tips / Cartridges Series compatible with this system:-
STTC Soldering Cartridges
-
SMTC Rework Cartridges
-
PTTC Tweezer Cartridges
|
Ambient Operating Temperature: |
|
10- 40 °C (50 °F - 104 °F) |
|
Maximum Enclosure Temperature: |
|
55 °C (131 °F) |
|
Input Line Voltage: |
|
100- 240 VAC, grounded circuit |
|
Input Line Frequency: |
|
50/60 Hz |
|
Power Consumption: |
125 Watts |
|
|
Output Power Maximum: |
80 Watts max. Per channel at 22 °C (when operated with two hand-pieces dynamically, the 80 watts output power is is shared based on demand) |
|
|
Output Frequency: |
13.56 MHzC |
|
|
Power Cord 3-Wire: |
183cm (18/3") SJT |
|
|
Dimensions (WxDxH): |
12.1cm x 13.0cm x 23.5cm (4.8" x 5.1" x 9.3") |
|
|
Certification / Marking: |
cTUVus, CE |
|
|
Tip-to-Ground Potential: |
< 2mV |
|
|
Tip-to-Ground Resistance: |
< 2 ohms |
|
|
Idle Temperature Stability: |
± 1.1 °C (2 °F) in still air |
|
|
Hand-piece Cable Length: |
L=122cm (48"), burn resistant, ESD safe |
|
|
Hand-piece Connector: |
F connector |
|
|
Workstand Dimensions (WxDxH): |
8.6cm x 19.1cm x 8.3cm (3.4" x 7.5" x 3.3") |
|
|
Weight of the power supply: |
7.4 lbs (3.35 kg) |
|
|
Weight of the * workstand: |
1.05 lbs (0.476 kg) |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
