Image for Illustrative Purposes Only
MicroCare Alcohol-Enhanced Flux Remover- ProClean MCC-PRO 12 oz. Aerosol
SKU: MCC-PRO
MCC-PRO
DESCRIPTION
Resources
Shipping & Delivery
MicroCare Alcohol-Enhanced Flux Remover- ProClean MCC-PRO 12 oz. Aerosol
Cleaning is fast and easy with ProClean™ enhanced RMA flux remover, a best-seller from MicroCare.
12 oz. Aerosol
MicroCare Alcohol-Enhanced Flux Remover- ProClean MCC-PRO Key Benefits-
Versatile cleaning "” works great on R, RA, RMA, OA and SA fluxes and pastes
-
Low cost, particularly with the new jumbo-sized aerosol packaging (30% more cleaning for 15% just more cost)
-
Use on solder pastes, fluxes and fresh chip bonder
-
Familiar alcohol odor
-
Medium Strength (45 Kb est.)
-
Plastic-safe, ESD safe
-
Slow drying increases cleaning time when working with baked-on flux residues
-
Alcohol blend delivers increased cleaning strength compared to isopropyl alcohol
-
Flammable
-
VOC content: 785g/L
-
RoHS, WEEE. REACH and EPA SNAP compliant
-
The aerosol package is TriggerGrip™ cleaning system compatible
It is a mild, plastic-safe, low-cost blend of three alcohols that enhances cleaning compared to ordinary IPA alcohol. This means ProClean™ out-cleans other products on rosin fluxes, water-based OA fluxes, synthetic fluxes and most "no-clean" flux residues. Totally plastic-safe, it is relatively slow-drying, which gives operators enough time to clean flux residues without wasting a lot of fluid. Water-free, non-corrosive and ESD-safe, ProClean™ is highly suitable for all types of electronics, including through-hole and SMT boards, insulators, cables and connectors. Often used in repair shops, ProClean™ offers familiar handling, low cost, broad materials compatibility and versatile cleaning. It also is mil-spec approved for many military products and electronics, including MIL-STD-2000. It is 100% volatile, so no rinsing is ever required. Made from renewable resources. Flammable. Biodegradable. Completely ozone-safe. Low GWP. 100% VOC. TriggerGrip™ compatible. StatZAP™ compatible.
MicroCare Alcohol-Enhanced Flux Remover- ProClean MCC-PRO Technical Data | |
Appearance |
Clear, colorless fluid |
Odor |
Alcohol |
PEL (ppm, 8-hr TWA) |
260 |
Boiling Point |
77 ºC / 173 ºF |
Chemical Family |
Alcohol |
Evaporation Rate |
Slow |
Cleaning Strength (Kb) |
45 |
Active Ingredients |
A blend of three water-free alcohols |
Flashpoint |
17 °C / 63 °F |
VOC Organic Content (g/L) |
785 |
Ozone Impact (O.D.P.) |
Zero |
REACH & ELINCS Compliant |
|
RoHS and WEEE Compliant |
|
Safety Rating |
Flammable |
Specific Gravity |
0.79 |
Vapor Pressure @ 20 ºC |
5.2 |
Discover the MicroCare Alcohol-Enhanced Flux Remover- ProClean MCC-PRO 12 oz. Aerosol at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.