Supplied with six formers, two bobbins (support rollers) and pins.
- Lightweight aluminium alloy formers with large angle of arc to support pipe during bending.
- This results in a bend of superior quality
- Cross section of formers is of “elliptical” form to minimise flattening of bend
- Solid frame fabrication eliminates flexing during bending operation
- Hydraulic ram is easily removed from frame and converts to 12 tonne jack
|FORMER|| ||RADIUS OF BEND|| ||FORMER|| ||RADIUS OF BEND|
|1/2 "|| ||75mm|| ||1.1/4"|| ||175mm|
|3/4"|| ||105mm|| ||1.1/2"|| ||200mm|
|1'|| ||140mm|| ||2"|| ||240mm|
Watch the video here